iSEMIC (for iphone / ipad)

The ¼“ iSEMic Microphone is a measurement mic specifically designed to interface directly with iPhones, iPads as well as other mobile devices including laptop computers and Phantom Powered Pro Audio Equipment. The iSEMic can be used directly with USB interfaces, without the need of any active converter, just using the appropriate adapter.

The iSEMic is 1/4″ (7mm) in diameter, 3.7″ (94mm) long and is manufactured from a stainless steel housing, with built-in electronics and gold plated connectors.. It operates on a supply voltage of 2.5V to 52Vdc with surge voltage protection and has a frequency range from 20Hz to 20kHz. It comes with both the free-field and diffuse-field calibration data included. 

With its mechanically robust design it is well suited for harsh environments such as open air sound reinforcement measurements. Its IEC 61672 class 2 frequency response makes it suitable for room acoustics analysis including recording studios and home theaters.

The iSEMic 725TR Base Kit-2 includes the SA-XBF Phantom power Adapter, 725TR microphone, SA-iBF adapter for iPhone/iPad, windscreen, brochure, individual calibration data (freefield&diffusefield) download from my.isemic.com at no cost, metal box.

Features:

  • Excitation voltage 2.5V to 52Vdc , current limited
  • Powers from: iPhone, iPad, other mobile devices, laptop computers, Phantom Power, ICP/IEPE power.
  • Microphone sensitivity typ -52dB re 1V/ pa (2,5mV @ 94dBspl)
  • Sensitivity optimized for mobile devices (e.g. iPad) not to clip.
  • Frequency range 20Hz…>20kHz
  • Temperature compensated for accurate SPL monitoring.
  • IEC 61672 class 2 frequency response Standard (125dBspl)
  • Surge voltage protection
  • Calibration chart and freefield– & diffusefield calibration data files download ready.
  • Stainless steel body, Gold plated connectors
  • Microphone body dia. 1/4” (7 mm)
  • Microphone length 3,7” (94 mm)
iSEMic & special accessories

most common option / stock item in bold
*prices ex. VAT, shipping & handling and local import taxes

480001iSEMic 725TR base kit, 725TR microphone, SA-iBF adapter for iPhone/iPad, windscreen, brochure, individual calibration data (freefield&diffusefield) download from my.isemic.com at no cost, metal box.€‎ 171,39
480002iSEMic 725TR base kit-2 including SA-XBF Phantom power Adapter, 725TR microphone, SA-iBF adapter for iPhone/iPad, windscreen, brochure, individual calibration data (freefield&diffusefield) download from my.isemic.com at no cost, metal box.€‎ 259,41
480005iSEMic 760TR Lin6 Kit, 760TR microphone, windscreen, brochure, individual calibration data (freefield&diffusefield) download from my.isemic.com at no cost, metal box.€‎ 157,50
400001iSEMic 725TR calibrated microphone only€‎ 146,38
400002iSEMic 760TR calibrated microphone only€‎ 146,38
460001SA-iBF adapter TRRS – CTIA adapter (iphone, ipad, other)€‎ 27,79
460002SA-SBF adapter TRRS – CMTP adapter (older Sony, other)€‎ 27,79
460003SA-XBF adapter active Phantom power adapter, impedance symmetrical€‎ 96,47
460010SA-BFM500 extension rod for speaker chassis measurement€‎ 54,66
470012CX-P48/BF Phantom power, XLR to SMB cable, asymmetrical, hot input only.€‎ 17,61
470022CX-BFBM SMB to SMB extension cable€‎ 16,58
470032CX-TRSBF Laptop TRS to SMB cable€‎ 15,93
470041CX-TA4FBF-1m TA4F 4pol mini XLR to SMB cable€‎ 19,90
470042CX-TA4FBF-2m TA4F 4pol mini XLR to SMB cable€‎ 21,08
220023MH-07D/iSEMic-CA Microphone bushing€‎ 12,55
CATALOG & CHAPTERS
  • ACOUSTICS CATALOG – pdf
  • iSEMicMICROPHONES – pdf
MANUALS
  • iSEMic manual – pdf

iSEMcon of Viernheim, Germany, develops and manufactures high end measuring microphones, calibrators, amplifiers and accessories.

The microphones, calibrators and accessories are of the highest quality – yet very affordable. Many sound engineers do swear by them.

You can find all iSEMcon products in the submenu.

Check the dealer network page for ordering.

pro audio measurement software